Showing posts with label stanley. Show all posts
Showing posts with label stanley. Show all posts

Stack-On GORTA-1250 Wall Cabinet with Full Length Doors Ready-to-Assemble Review

Stack-On GORTA-1250 Wall Cabinet with Full Length Doors Ready-to-Assemble
Average Reviews:

(More customer reviews)
The cabinet arrived as unassembled steel panels in a 31.5 x 10.5 x 16.5-inch cardboard box, 46lbs as delivered by UPS. While the box seems well-padded on the sides with styrofoam panels and blocks which hold the panels in place, I was surprised to reach the bottom of the box to find one of the door panels lying face down with no padding between it and the bottom of the box. In the box for the second cabinet that I ordered, the door was placed facing up with 2 sheets of cardboard between the two door panels. In both boxes, the silver door finish was still slightly scuffed and discolored, but luckily no dents or scratches from something penetrating the bottom of the box. Likewise, the shelf panels are interlocked and placed on the top of the box with one shelf facing up, with one sheet of cardboard between it and the box top. One of the side panels was bent where it attaches to the bottom panel, but it's not noticeable after assembly. One bottom corner of a shelf was also bent, which I installed facing the back of the cabinet and again it isn't noticeable. Each product package was shipped inside an Amazon box.

The doors have a smooth satin silver painted finish, while the other panels have a textured gloss black painted finish. Along the inner corners, some areas were missed by paint and some exposed metal and surface rust is evident. While installing screws, I noted that the paint is thin and scratches easily revealing metal.

The panels are assembled with small sheet metal screws. Although four 1/4x2" lag screws are provided to hang the cabinet to the wall, this is definitely a light-duty cabinet and not something I'd fill with full gallon paint cans, for example. The cabinet would've been stronger had they designed the side panels to interlock with the top and bottom panels along the entire edge, instead of relying on a few small screws. Nuts, bolts, and washers instead of the sheet metal screws would be another improvement.

Two 16-inch-spaced holes are provided on each back edge of the top and bottom panels for a total of four holes. I'm using fender washers with lag screws to mount the cabinet to the wall. The hang rail also has two 16-inch-on-center holes. The lip of the rail catches onto the lip of the upper back panel, which seems somewhat weak since this edge is fastened to the top panel by only two of the sheet metal screws near the corners (see below where I added screws to the back panel at the center of each seam), and two screws into each side panel. I used the rail to hang the empty cabinet level, and then installed lag screws into the top and bottom panels of the cabinet. Note that the distance from the hole to the side of the cabinet is only 5.25 inches, so if you are hanging two cabinets side-by-side you might need to drill mounting holes to line up with the wall studs. Also leave some space between cabinets so that the doors can function without interfering with each other. Although undocumented, there are 4 additional holes on the rolled back edge of each side panel which could also be used for added support. I installed a plywood backer to install the cabinets onto and I'm glad I did.

When assembling the cabinet, tighten the screws until they are nearly fully seated. This allows you to properly align the panels and gives room to insert the back panels. After all panels are in place, seat the screws, but not too tight because the metal is thin. I drilled a few extra holes and used the extra sheet metal screws to fasten the two back panels to each other, and to the centers of the top and bottom panels. The steel used to construct this cabinet is 22 gauge. It feels thin and bends fairly easily. The side panels seem to feel the most rigid due to the complete rolling and welding of the edges where the shelf adjustment slots are located. The edges of each shelf, top, and bottom panels should have been constructed the same way. Time will tell how these panels will hold up. I plan to add hardboard shelf liners to prevent scratching and denting.

The doors have a plastic upper pivot pin and a removeable metal lower pivot pin. All pins sit in nylon bushings. The right side door is held closed by a set of magnets on the top and bottom edge. The left door has a flange that the right door closes over, so the left door cannot be opened without first opening the right door. When opening the door using the pull, the door panel flexes significantly as it tries to pull away from the top magnet. The most impressive and unexpected feature of this cabinet is the hefty solid stainless door handles. Due to the strength of the door magnets, I was afraid that pulling on the handles would cause the thin door panels to stretch outward around the door handle holes. Since I used different lag screws and fender washers to hang the cabinet, I used the included washers for the lag screws on the handle screws to prevent pull-out. There are no provisions in the door for installing locks, other than some sort of padlock or child lock across the pull handles.

These cabinets look good from a distance, but are definitely light duty (as expected at this price). The panels have almost a "cookie tin" feel, or how a cheap office file cabinet feels. It's not worth the cost and effort to reinforce these units over getting higher-end, heavier-duty cabinets. I will probably put less-frequently-used items in them and look for a set of more rugged and sturdy metal cabinets for heavier tools and items.

Click Here to see more reviews about: Stack-On GORTA-1250 Wall Cabinet with Full Length Doors Ready-to-Assemble



Buy NowGet 10% OFF

Want to buy Stack-On GORTA-1250 Wall Cabinet with Full Length Doors Ready-to-Assemble at other amazon sites? Click the corresponding icon below:



buy it at amazon.combuy it at amazon.co.ukbuy it at amazon.cabuy it at amazon.debuy it at amazon.fr

Stanley Tools and Consumer Storage 716201R 16-1/4-Inch Deep Wall Cabinet Review

Stanley Tools and Consumer Storage 716201R 16-1/4 inch Deep Wall Cabinet
Average Reviews:

(More customer reviews)
I purchased two of these, along with the tall standalone cabinet.I compared these with Sears' Craftsman and Gladiator units.The Stanley model was much superior to the Gladiator.Stanley's feel solid and they hang on the wall neatly and securely.Truthfully, if the cost was the same, I'd have bought the Craftsman, but the cost of these were significantly cheaper and I was able to get free shipping from Amazon (FEDEX!!!) and no sales tax, so Stanley won out.I don't regret the decision at all, and recommend these products.One word of caution, however:Most of these parts "snap together," there are few screws, except for mounting.The instructions are good and clear, but it's still easy to make a mistake and snap together a couple of parts incorrectly.And it's real difficult to unsnap them! All the parts are numbered and if you're more careful than I was, you won't have any problems assembling these cabinets!

Click Here to see more reviews about: Stanley Tools and Consumer Storage 716201R 16-1/4 Inch Deep Wall Cabinet

Product Description:
2 door wall cabinet. Multi layer coated metal fronts on doors. Polypropylene frame. 3" deep doors with pegboard holes and 2 multipurpose bins. Pegboard holes on cabinet sides. Metal hang bar supplied to easily fasten to the wall. 1 reinforced resin shelf

Buy NowGet 9% OFF

Want to buy Stanley Tools and Consumer Storage 716201R 16-1/4 Inch Deep Wall Cabinet at other amazon sites? Click the corresponding icon below:



buy it at amazon.combuy it at amazon.co.ukbuy it at amazon.cabuy it at amazon.debuy it at amazon.fr

Linear 105015 310MHz 1-Channel Visor Transmitter Review

Linear 105015 310MHz 1-Channel Visor Transmitter
Average Reviews:

(More customer reviews)
Our old gate operator was the exact same model, but finally wore out.The company that maintains the gate on our lane quoted me a price of almost $100 dollars for this operator.I got it from ASAP for $13.90.What a deal!I immediately contacted my nieghbors on the lane to let them know the gate guy can't hold us hostage anymore!Thank you!

Click Here to see more reviews about: Linear 105015 310MHz 1-Channel Visor Transmitter

Product Description:
The Model 105015 1-Channel Visor Transmitter is a portable transmitter designed for automatic door and gate operator applications.This transmitter is a single-channel device, pressing the pushbutton will send a signal to the receiver. The transmitter has a red test/operate indicator and is powered by a 9-volt battery. A visor clip is included.The Model 105015 is compatible with 310 MHz Stanley receivers and Model 109950, 302850, and 309013 receivers.

Buy Now

Want to buy Linear 105015 310MHz 1-Channel Visor Transmitter at other amazon sites? Click the corresponding icon below:



buy it at amazon.combuy it at amazon.co.ukbuy it at amazon.cabuy it at amazon.debuy it at amazon.fr

Stanley 1082 Garage Door Remote Transmitter Review

Stanley 1082 Garage Door Remote Transmitter
Average Reviews:

(More customer reviews)
If you still have an older "Stanley" garage door opener from the 1980's-1997, this unit is perfect for you.I had the older bulkier unit and it was terrible.I was too cheap to get a new garage door opener, so I had to get some new remotes.This was the perfect unit for me.
Programing it took about 2 minutes (for the 2 units I bought) since it has only 10 dip switches.
The size is great, it is small enough for your key chain, but I like to keep it in the car instead like most people do.
My only complaint on the unit is that it didn't have the option of a clip so I could put it on my visor, but that is a small issue on an otherwise great unit.

Click Here to see more reviews about: Stanley 1082 Garage Door Remote Transmitter

Product Description:
1 button transmitter for Stanley non-securecode garage door openers. 10-Dip switches to code.Battery included.Mini key-chain size.

Buy Now

Want to buy Stanley 1082 Garage Door Remote Transmitter at other amazon sites? Click the corresponding icon below:



buy it at amazon.combuy it at amazon.co.ukbuy it at amazon.cabuy it at amazon.debuy it at amazon.fr

Universal CR-2149 - Safety Beam Sensors for Garage Door Openers Review

Universal CR-2149 - Safety Beam Sensors for Garage Door Openers
Average Reviews:

(More customer reviews)
Bought it from ASPDOORS & A WHOLE LOT MORE on Amazon --

Product setup REALLY Easily -- was a great replacement

The company delivered it the next day (it was sent USPS -- same state)..

Highly Recommend both product and the vendor.

Click Here to see more reviews about: Universal CR-2149 - Safety Beam Sensors for Garage Door Openers

Product Description:
The Universal Replacement Beam Sensor Kit includes:One Sender and One Receiver ModuleTwo Mounting BracketsFour Wood ScrewsInstruction Sheet

Buy Now

Want to buy Universal CR-2149 - Safety Beam Sensors for Garage Door Openers at other amazon sites? Click the corresponding icon below:



buy it at amazon.combuy it at amazon.co.ukbuy it at amazon.cabuy it at amazon.debuy it at amazon.fr