Average Reviews:
(More customer reviews)This bit makes high quality cuts.My 2-1/4 hp router had no trouble raising panels in 3-4 passes with the rpm lowered to 10,000.Cleanest, smoothest cuts I have seen.Very little sanding is required.
When looking for a raised panel bit ask yourself these questions...
1.Does it have a bearing?You will need a bearing if you want ro raise arch-top panels.This bit has a bearing.
2.Does it have a back-cutter?Back cutters will ensure a 1/4" tongue on the panel, and cut front and back in one operation.The other nice thing about a back-cutter is it sets the raised panel flush with the rail and stiles.This bit does not have a back-cutter.Rockler, Amana, and CMT make raised panel bits with back cutters.Freud's have back cutters, but no bearing.
3.How wide of a bit do you want?The width of the bit will determine the reveal on your cabinet doors.This bit is a 2-1/2" diameter, creating a relatively narrow 1-1/8" reveal.I prefer the 3-1/2" bits for a more dramatic look.Amana makes a 3-3/8" bit with bearing and back-cutter.CMT makes a 3-1/2" bit with bearing and back-cutter.Just make sure the plate in your router table has a hole large enough to accomodate these large bits.
Click Here to see more reviews about: Raised Panel Router Bit - Ogee Horizontal 2-1/2 Diameter x 5/8 High
Product Description:
Use theses top-quality horizontal raised panel bits to cut either straight-edged or curved door panels.
Dimensions:
A 2-1/2"
B 5/8"
C 1/2"
D 1-3/4"
R 5/8"
A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life.
Quality performance features include:
K10 and K20 grade carbide for clean cutting action.
Final sharpening with 600 - 800 grit diamond wheels.
Precision balanced for smooth operation.
Baked-on anti-stick coating to reduce pitch and resin buildup.
Unconditionally guaranteed - if you are not 100% satisfied with these bits, send them back for a full refund.
NOTE: Intended for use in a router table only.
Want to buy Raised Panel Router Bit - Ogee Horizontal 2-1/2 Diameter x 5/8 High at other amazon sites? Click the corresponding icon below:
0 comments:
Post a Comment